Features

• Over-current protection, over-voltage protection, and reversal protection for the power supply and all of the input and output terminals
• Reliable network system of controllers using either TCP/IP or RS-485 Serial communication
• Supports different Wiegand formats, and connects to ZK readers as well as HID, Mifare, and generic ID card readers
• Connects with a variety of electric locks, sensors, exit buttons, alarm devices, and indicators.
• Can be integrated with other security systems such as CCTV, Intrusion Detection, Fire Alarm Release, and elevastor Control for total security system. Directly compatible with ZK’s biometric reader controllers.
• Easy-to-use and intuitive programming with ZKAccess Software
• System management by browser from client PC’s. No need to install software on each client
• Programming of special logic between doors is set up with simple pull down menus. No special scripts or code is required.
• Management software allows indication of real-time door status and remote commanding of door open/close state. Alarm conditions such as forced open and extended open alarms are reported
• Advanced access control capabilities are built into the hardware, including anti-passback, Dual and multi-Card Authentication, and Duress Mode.

Specification

Capacity

Users	30,000
Event Buffer	100,000 transactions

RAM

RAM	32M

Reader Port

Qty. 2	26/34bit Wiegand
Qty. 2	8bit burst for PIN

Output Port

Qty. 1	1 Aux FORM-C relay output-SPDT 2A@30V AC
Qty. 1	1 FORM-C relay output-SPDT 5A@36V DC or 8A@30V AC

LED

Indicator	communication, power, status and prox card

Environment

Operating Temperature	32-113 F (0-45 C)
Operating Humidity	20% to 80%

Packaging

Dimensions	9 1/4″ x 7 3/4″ x 3″
Weight	7.8 lbs (3.55 kgs.)

CPU

32bit	400MHz CPU

Communication

Communication	RS485
Communication	TCP/IP

Input Port

Qty. 1	Auxillary Input
Qty. 1	Door Sensor
Qty. 1	Request to Enter

Baud Rate

RS485	9600-38400 baud

Power

Power Supply	9.6V-14.4V DC, 1.5A

Dimensions

Length	7.5″ (190 mm)
Width	5.5″ (140 mm)