top of page


  • C3-200

    C3-200’s versatile design features take care of present and future needs with ease and efficiency. It is one of the most rugged and reliable door controllers on the market, with a multitude of built-in features.

    Be sure to inquire about ZKAccess options which can further reduce your C3 installation time and labor, including:

    1) Power over Ethernet (12V 2A)
    2) InBridge Server (Single-purpose management appliance with pre-loaded software)
    3) Wireless Bridge (up to 300-foot range)


    • Over-current protection, over-voltage protection, and reversal protection for the power supply and all of the input and output terminals
    • Reliable network system of controllers using either TCP/IP or RS-485 Serial communication
    • Supports different Wiegand formats, and connects to ZK readers as well as HID, Mifare, and generic ID card readers
    • Connects with a variety of electric locks, sensors, exit buttons, alarm devices, and indicators.
    • Can be integrated with other security systems such as CCTV, Intrusion Detection, Fire Alarm Release, and elevastor Control for total security system. Directly compatible with ZK’s biometric reader controllers.
    • Easy-to-use and intuitive programming with ZKAccess Software
    • System management by browser from client PC’s. No need to install software on each client
    • Programming of special logic between doors is set up with simple pull down menus. No special scripts or code is required.
    • Management software allows indication of real-time door status and remote commanding of door open/close state. Alarm conditions such as forced open and extended open alarms are reported
    • Advanced access control capabilities are built into the hardware, including anti-passback, Dual and multi-Card Authentication, and Duress Mode.



    Users 30,000
    Event Buffer 100,000 transactions


    RAM 32M

    Reader Port

    Qty. 4 26/34bit Wiegand
    Qty. 4 8bit burst for PIN

    Output Port

    Qty. 2 1 Aux FORM-C relay output-SPDT 2A@30V AC
    Qty. 2 1 FORM-C relay output-SPDT 5A@36V DC or 8A@30V AC


    Indicator communication, power, status and prox card


    Operating Temperature 32-113 F (0-45 C)
    Operating Humidity 20% to 80%


    Dimensions 8″ x 6″ x 2 1/2″
    Weight 3 lbs (48 ozs.)


    32bit MIPS CPU


    Communication RS485
    Communication TCP/IP

    Input Port

    Qty. 6 Exit Button #1
    Qty. 6 Door Sensor #1
    Qty. 6 Aux #1
    Qty. 6 Exit Button #2
    Qty. 6 Door Sensor #2
    Qty. 6 1Aux #2

    Baud Rate

    RS485 9600-57600 baud


    Power Supply 9.6V-14.4V DC, 1A


    Length 10″ (160 mm)
    Width 6.6″ (106 mm)
bottom of page